Welcome to the official website of Guangzhou Youda Coating Co., Ltd.!

About us              Products                                  News                               Contact us

Tel:86-020-37400096
Phone:136 0030 4588

              13124259290(Mr. Jiang)
Fax:86-020-37403361
Mailbox:ud8888@aliyun.com
Add:Liangshi Road, Liangtian, Baiyun District, Guangzhou

COPYRIGHT @ 2020 Guangzhou Youda Coating Co., Ltd. gzud.com.cn. ALL RIGHTS RESERVED.                                                                                                                      ICP:45646546-1 Powered by www.300.cn

产品名称

Anode low-temperature curing varnish

The anode low-temperature curing varnish, model ed-7, is independently developed by our company according to the current electrophoretic market demand and future development direction.
没有此类产品
Description
I.Product introduction
 
The anode low-temperature curing varnish, model ed-7, is independently developed by our company according to the current electrophoretic market demand and future development direction.
The ed-7 has many advantages, such as good corrosion resistance, high penetration, excellent stability and convenient storage.At the same time, the coating can be cured directly at 120 ° low temperature without pre baking, which can save about 30% energy compared with high temperature electrophoretic coating.
At the same time, the anode low temperature electrophoretic paint can be widely used in workpieces that are easy to deform and change color after high temperature baking, such as aluminum alloy, zinc alloy, die-casting iron, die-casting copper and other materials.2、 Product specifications.
 

Item

Product specification

Inspection conditions

Appearance

Yellowish and clear

Visual

Solid ingredients

60+ 2%

105C = 3hrs

Viscosity

Z1 ~ Z2

Gardner at25℃

Pigment

< 2

Grander

 
 
II.Product performance
 
1, performance objectives
a. Mitsubishi pencil hardness ≥ 2H
b. Dry adhesion level 0
c. High pressure adhesion Class 0
d. Boiling water resistant for 5 hours without blistering, wrinkling or falling off
e. The paint can't be knocked off
f. Resistant to washing for 72 hours without blistering, wrinkling or falling off
g. Acid resistant salt spray (CASS) single side corrosion and blistering < 4mm
 
2, test results
a. Hardness and dry adhesion: RT × 10min, 120 ℃× 60min, RT × 12h curing after electrophoresis, dry film thickness about 14 μ M
Test as usual
Test sample: aluminum plate
                                                                            
Resin number              Pencil hardness           Baige adhesion       
Ed-7 ≥ 2H level 0  
 
 

Resin number

Pencil hardness

Baige adhesion

ED-7

More than 2H

0level

 
 
b. High pressure adhesion: after electrophoresis, RT × 10min, 120 ℃× 60min, RT × 12h maintenance, dry film thickness of about 14 μ m, use high-pressure boiler with standard steam pressure gauge.Using deionized water, the conductivity is less than 10 μ s / C ㎡.Put the workpiece into the water temperature of 95-99 ℃, draw a hundred grids with a spacing of 1mm first, the workpiece to be measured is suspended in the water, can not touch the bottom of the pot and the surface of the water, the pressure is kept at 0.1MPa, the time is 2h, after taking out the workpiece, pull it with a tape with a standard adhesion of (10 ± 1) n / 25mm.Pull with minimum angle.Level 0-1 is pass requirement
Test sample: aluminum plate
                                                                
Resin No. pull after high pressure adhesion for 2h
Ed-7 level 0 pass requirements
 
 

Resin number

Pull after high pressure adhesion for 2h

By request

ED-7

0level

 
 
c. Impact test: after electrophoresis, RT × 10min, 120 ℃× 60min, RT × 12h curing, dry film thickness: 14 μ m, use the paint film impactor with standard diameter of 8mm steel ball, and the height of impact protrusion is 2.5mm without paint dropping as the passing requirement
Test sample: aluminum plate
 
Resin number impact resistance
Ed-7 passing requirements without paint dropping
 

Resin number

Impact resistance

By request

ED-7

No lacquer

 
 
 
 

d. Boiling water resistance: RT × 10min, 120 ℃× 60min, RT × 12h maintenance after electrophoresis, dry film thickness of about 14 μ M

Use deionized water with conductivity less than 10 μs / C ㎡and put it into water temperature of 95-99 ℃. The tested workpiece is suspended in the water and can not touch the bottom of the pot or surface for 5h. Take out the paint film of the workpiece without falling off, blistering and wrinkling

Test sample: aluminum plate

Resin No. boiling water resistant 5h

Ed-7 has no shedding, blistering and wrinkling requirements

 

Resin number

Boiling water resistant 5h

By request

ED-7

No peeling, blistering or wrinkling

 

f. Washing resistance: RT × 10min, 180 ℃× 25min, RT × 12h maintenance after electrophoresis, dry film thickness of about 14 μ M

Prepare 30g / L test solution with deionized water and place the sample in the test solution at 38 ±1 ℃for 72h.Pull the adhesive tape with standard adhesive force (10 ±1) n / 25mm, and pull the adhesive tape quickly at an angle perpendicular to the surface of the paint film. It is required that the paint film does not fall off or blister.

Test sample: aluminum plate

Resin No. resistant to pull after 72 hours of washing

Ed-7 has no shedding and blistering requirements 

  

Resin number

Resistant to pulling after 72 hours of washing

By request

ED-7

No peeling and blistering

 

e. Acid resistant salt spray (CASS): RT × 10min, 120 ℃× 60min, RT × 12h maintenance after electrophoresis, dry film thickness of about 14 μ m, salt spray test according to GB / t10125, single side corrosion and foaming of fork < 4mm

Resin No. acid resistant salt spray (CASS) 48H

No abnormality is found at the blank film of ed-07, no inclusion is found at the crossing, but there are scattered bubbles < 4mm, passing the requirements

 

Resin number

Acid resistant salt spray (CASS) 48H

 

By request

ED-07

There is no abnormality at the blank paint film, no erosion at the crossing, but there are sporadic vesicles < 4mm,

 

 
 
Cass 48 hours picture attached
 
 
 
1 1

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待

RECOMMEND

MESSAGES

Guangzhou Youda Coating Co., Ltd.

If you are interested in our products,
Please fill in the requirements and

leave me a message!